Preamps & Other Components

The Pro2 PRO1387 Phono Preamplifier adds phono capability to any amplifier or receiver that has a spare AUX/​CD/​DVD Audio linelevel input.

It can also be used to input a turntable directly into a mixer or computer soundcard. With its precise RIAA (Recording Industry Association of America) equalization, this preamp’s sound quality easily matches or exceeds that of the phono preamps found built into the highest quality stereo components.

Its switch-selectable AUXenables easy selection for inputs, eliminating the need to connect and disconnect sources that share the input with this preamp.

McLelland UP2 Phono Preamp wth USB and volume control.

Specifications

• For all turntables with moving magnet (MM) cartridges or audio devices with line level (e.g. tape decks)
• External housing, reliably shielded against interference
• Audio recording takes place through USB No need to open the computer housing
• Top quality circuit technology and components
• Built-in low-noise phono preamp circuit conforms to the RIAA standard
• Signal and peak LED
• No additional drivers required
• Power supply included

9V DC switchmode wall-wart power supply, 500mA current availability.

Small, efficient and and lightweight.

Has reversible polarity 2.1mm connector.

Specifications

• Energy efficient regulated DC output
• Short-circuited and overload protection
• Compact and light weight design
• Input voltage: 100-240Vac, 50/60Hz

Auto pairing, enjoy music entertainment in 3-5 seconds, 8 devices can be memorised, transmission range: 30 feet line of sight,

Specifications

• Bluetooth profile A2DP/IOPT
• BT 3.0
• Frequency 2402~2480 MHz
• Sensitivity -84 dBm
• Spurious output level -156 dBm/Hz
• Audio output 3.5mm stereo
• Audio cable 3.5mm male to 3.5mm male 6 foot cable
• Audio cable 3.5mm stereo female to 2 RCA 6 foot 3/4 inch cable

The highly efficient audio amplification of the Dayton Audio DTA30HP provides an amazing soundstage and presence combined with enhanced clarity and sound quality; all at an amazingly low price.

The DTA30HP features the Texas Instruments TPA3116D2 known for its stereo efficiency and incredible sonic performance. The TPA3116D2 is fully protected against faults with built-in thermal and short-circuit protection. The built-in TI based TPA6110A2 stereo headphone audio amplifier is capable of delivering 150 mW of continuous power per channel into 16 ohm headphones.

Generate pristine, low-noise audio whether you are using desktop speakers or your favorite pair of headphones. Operation of the DTA30HP is simple and straightforward. On the front of this amp you will find a push button on/off switch and smooth analog volume control.

Also on the front panel is a conveniently located 3.5 mm stereo input jack and gold plated 1/4" headphone output jack. Gold plated RCA line level stereo inputs and 5-way speaker binding posts are featured on the back panel, as well as the DC power jack.

A robust 12 VDC, 2A power supply comes with this amp to ensure that it is given the right voltage and current to function at peak performance.

Specifications

Power handling: 2 x 15 watts RMS @ 4 ohms with 12 VDC power supply, Headphone power handling: 10 mW, Minimum speaker impedance: 4 ohms, Headphone impedance: 16 ohms, Frequency response: 20-20,000 Hz, THD: <0.1% @ 1 WPC, SNR: 96 dB, A weighted, Inputs: 3.5 mm AUX (front panel), Stereo RCA (rear panel), Outputs: Stereo binding posts (rear panel), 1/4" headphone (front panel), Input impedance: 10 kohms (minimum), Input sensitivity: 470 mV, Channel separation: 77 dB, Efficiency: >90%, Dynamic range: >100 dB, Power supply: 12 VDC, 2A center pin positive, Dimensions: 1.28" H x 3.82" W x 5.16" D